Dual Payload RGB and Multispectral

Important Note!!!!
Be sure to use DJI Go app and in the settings tab turn off the collision avoidance system and the downward and forward looking vision system sensors. If this is not done the drone will respond ERRATICALLY.

We listened to the needs of our Phantom 4 Pro customers and set out to make the P4 Pro even more versatile by designing a simple but effective integration kit that would allow the DJI Phantom 4 Pro owners the use of the Micasense RedEdge camera system alongside the Phantom 4 Pro’s camera. We designed the mount system to be a “tool-less” design and fully independent of the Phantoms systems. Nothing is changed on the Phantom 4 aircraft. The total system can be installed and removed in under one minute once the isolator mount is installed on the RedEdge camera with four screws. The mount components are 3D printed by SFR design team. The kit parts are 3D printed in high strength white plastic and snaps in place. Camera and Isolator mount have a quick detachable system that allows the camera to be removed in seconds.

Micasense RedEdge and Phantom 4 Pro integration specs

• “Tool-less” design allows use of Phantom 4 camera simultaneously with RedEdge MX, M, RE3
•Field tested flight time is 13-15 minutes and up to 90 acres depending on wind conditions
• 2600 Mah regulated Li-ion standalone battery system with estimated 4 flights between battery change.
• Includes 2nd gen power system. It’s a self-contained battery system rechargeable with USB port and cable.
• Flying weight of the system 335-gram Gen. II vs 395 grams Gen.I. Great weight savings!!
• GCS recommended Drone Deploy , DJI GS Pro , Atlas Flight